Double Power Technology T-708 Manual del operador descargar pdf (Pagina 35)

Setting Up the 708-DS / 709-DS 3

708-DS / 709-DS Operator’s Manual 35

Sample Manifold Installation

1 From the Main screen, press Menu > Diagnostics.

2 Position the sample manifold so the center screw is aligned with the

center receptor beneath the drive unit. Ensure the left and right

alignment shafts are also positioned correctly.

Figure 12 Positioning the Manifold for Installation

3 Push the manifold up into the drive unit until resistance is met.

4 While gently lifting upward, press Load from within the Manifold

Control box. The internal drive should slowly lift the manifold to its

fully raised position.

5 If the unit is equipped with AutoTemp, attach the two 9-pin RS232

cables to the underside of the drive unit.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 139 140

Sin comentarios

Double Power Technology T-708 Manual del operador Pagina 35