Double Power Technology T-708 Manual del operador descargar pdf (Pagina 33)

Setting Up the 708-DS / 709-DS 3

708-DS / 709-DS Operator’s Manual 33

Agilent 708-DS / 709-DS Setup

Complete the following sections to set up the Agilent 708-DS / 709-DS.

Vessel Isolation Chamber Installation (709-DS)

1 Insert a vessel isolation chamber for each applicable position

between the vessel plate and the base plate of the 709-DS.

2 Ensure the center peg on the bottom surface of each chamber aligns

with the hole in the base plate.

3 Locate the isolation chamber mirrors and place one in the bottom of

each of the cylinders.

NOTE

The wiring on the underside of the vessel plate should be avoided during

chamber installation. To accomplish this, begin by installing the rear

middle positions first from the left side of the 709-DS.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 139 140

Sin comentarios

Double Power Technology T-708 Manual del operador Pagina 33