Double Power Technology T-708 Manual del operador descargar pdf (Pagina 100)

100 708-DS / 709-DS Operator’s Manual

4 Operating the 708-DS / 709-DS

Agilent 708-DS / 709-DS Notifications

Main Screen - Error Conditions

Tolerance limit monitoring is enabled when the spindle starts moving

and the bath starts heating. Any fluctuations beyond the tolerance limits

cause the corresponding displayed value to turn from blue to red and a

dialog box with the corresponding error message to be displayed.

More critical errors are displayed on a separate error screen. These

errors may include the following:

• Bath temperature out of tolerance

• Bath probe open circuit

• Bath probe short circuit

• Heater probe open circuit

• Heater probe short circuit

• Heater to bath probe offset > 6º. For this error, it is important to

disable the heater to prevent potential damage due to a dry system.

• Spindle speed error if the set speed and actual speed differ by a value

greater than the spindle speed tolerance.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 139 140

Sin comentarios

Double Power Technology T-708 Manual del operador Pagina 100